AMG cars


A perfect Recreation

Aston Martin Lagonda SUV

for only US$21,000

Electric car specifications

The liquid-cooled powertrain includes the battery, motor, drive inverter, and gear box.
40 kWh microprocessor controlled, lithium-ion battery
Three phase, four pole AC induction motor with copper rotor
Drive inverter with variable frequency drive and regenerative braking system
Single speed fixed gear with 9.73:1 reduction ratio

10 kW capable on-board charger with the following input compatibility: 85-265 V, 45-65 Hz, 1-40 A (Optional 20 kW capable Twin Chargers increases input compatibility to 80 A)
Peak charger efficiency of 92%
10 kW capable Universal Mobile Connector with 110 V, 240 V, and J1772 adapters


· Eight airbags: head, knee and pelvis airbags in the front plus two side curtain airbags

· Driver and front passenger seat sensors

· Driver seat position sensor

· Three point driver and front passenger safety belts with retractor pretensioners and secondary lap anchor pretensioners and load limiters

· Three point second row safety belts for all three seats

· Acoustic front row safety belt warning

· Rollover crash sensor

· Crash sensor for high voltage disconnect

· Three second row LATCH attachments for child seat installations (accommodates three child seats simultaneously: two with LATCH and one with top tether and belt)

· Rear door child safety locks

· Interior, manual release mechanism for all doors, frunk, and rear cargo area

· Anti-theft alarm and immobilizer system

Suspension, Steering, and Brakes
Double wishbone, virtual steer axis coil spring front suspension and independent multi-link coil spring rear suspension
Variable ratio, speed sensitive, rack and pinion electronic power steering
Electronic Stability Control
Traction Control
Anti-Lock disc brakes (ABS) with ventilated rotors and electronically

Chassis and body

Body/Frame: Carbon Fiber/Carbon Fiber/Aluminum Crash Structures

Brakes: Front: 15.0" Vented Slotted Carbon Ceramic Discs/8-Piston Caliper.

Rear: 15.0" Vented Slotted Carbon Ceramic Discs/6-Piston Caliper.

Steering: Rack and Pinion, Variable Electric Assist

Turns, Lock to Lock: 2.5

Turning Circle: 41.6 ft (12.7 m)

Suspension: Front & Rear: Unequal Length Upper and Lower A-Arms, Coil Over Springs, Remote Reservoir-Adjustable Penske Coil-Over Shocks, Cab Controlled Air Lift, Anti-Roll Bar.

Total Dry Weight: 2,750 lbs.

Tube chassis specifications

The lightweight steel-tube chassis mated to a powerful electric Tesla power plant. The chrome-moly space frame is reinforced with honeycomb-composite panels for increased rigidity while the suspension consists of unequal-length A-arms and coil-over shocks at all four corners. Race-spec Brembo calipers tackle the braking duties accompanied by massive vented rotors, 15-in. front and 14-in. rear. The race-car chassis gains additional roll-cage bracing, while the engine and suspension are tuned toward racing, but retain the replica´s basic configurations. The carbon-fiber mixed with Kevlar (bullet proof material) bodywork is very similar, with the original chassis also employing quick-release latches. Brake systems are identical using the Brembo brake system. The carbon-fiber cloth is layered over the molds and then cured in an autoclave. In areas where extra stiffness is needed-such as the top of the fenders-half-inch aluminum-honeycomb panels are sandwiched in the carbon-fiber layers. The chassis comprises a space frame-derived design consisting 4130 lightweight steel and aluminum honeycomb composite reinforcing panels. It is divided into bolt-fastened sub-assemblies to allow for rapid access to critical subsystems. The light weight of the chassis allows for the car to weigh a mere 2750 pounds (1247 kg). Standard electronics include: Power windows, locks, Remote control operated doors, hood, trunk, and engine compartment openers, electronic power steering with redundant safety circuits, 110 volt inlet for maintaining vehicle battery, electronic heated front window, electronic fuel pump shut off upon crash impact, rearview camera system within dash flip up monitor, and navigation. Electrical wire harnesses are manufactured with the highest quality materials Teflon coated tinned military spec wire, cannon plugs, gold plated pins and sockets were used in connectors, wire harnesses wrapped with high temp glass mesh under a woven Kevlar outer skin.